AMX NMX-ENC-N2412A-C, Encoder
$2,998.00
The NMX-ENC-N2412A is the first low-latency Encoder Card to distribute video at resolutions up to 4K60 4:4:4 over Gigabit Ethernet networks. Utilizing JPEG2000 encoding, the N2412A and N2422A encoders and decoder (N2400 Series) deliver cinema quality video with just two frames of latency. Furthermore, these products support HDMI 2.0 and HDCP 2.2, offering increased compatibility with 4K sources and displays.
The N2400 Series encoders and decoders use the same control APIs, software, and web interfaces as the existing Networked AV products, which have been optimized to market needs as a result of years of field experience.
The N2412A Card is designed for use with the NMX-ACC-N9206, 2RU Rack Mount Cage and NMX-N7142 Presentation Switcher with Networked AV.
-
1 lbs
Only logged in customers who have purchased this product may leave a review.
Related products
-
JPEG 2000 1080p Low Latency AV over IP Encoder with KVM, PoE, SFP, HDMI, AES67 Support, Card
$3,830.00 Add to cartJPEG 2000 1080p Low Latency AV over IP Encoder with KVM, PoE, SFP, HDMI, AES67 Support, Card
SVSI Stand-alone JPEG2000 Encoder with ultra-low latency for 1080p/60hz, KVM control, one SFP fiber/RJ45 copper network port cage, and one RJ45 (with PoE), IR, serial, KVM-over-IP keyboard and mouse operation, balanced audio, VGA, and HDMI connectors, AES67 compatible (SFP module not included, power supply not included)
$3,830.00 -
AMX NMX-ENC-N2412A, Encoder
$3,060.00 Add to cartAMX NMX-ENC-N2412A, Encoder
The NMX-ENC-N2412A is the low-latency encoder that distributes video at resolutions up to 4K 4:4:4 over Gigabit Ethernet networks. Utilizing JPEG2000 encoding, the N2412A encoders deliver cinema quality video with just two frames of latency. Furthermore, these products support HDMI 2.0 and HDCP 2.2, offering increased compatibility with 4K sources and displays.
-
1 lbs
$3,060.00 -
-
AMX Jpeg 2000 Digital Cinema Grade Video Over IP Decoder, HDMI
$1,681.00 Add to cartAMX Jpeg 2000 Digital Cinema Grade Video Over IP Decoder, HDMI
The AMX SVSI N2000 Series utilizes JPEG2000 compression for HD, cinema-grade video distribution on the LAN for applications when video quality is top priority. The NMX-DEC-N2212A Decoder is used to decode streams back to DVI or HDMI format for display on any monitor. Pair with the NMX-ENC-N2121A to encode and distribute sources of almost any format onto an existing IP network making that stream available to any endpoint in the facility. With the ability to direct any source stream to any display, large, low-cost switching and distribution systems are simple to deploy without proprietary cabling or dedicated switching hardware.
The NMX-DEC-N2212A includes Local Play, allowing users to upload and save 8 playlists that can contain up to 64 jpeg or PNG files. When a video stream is lost, the stored images will play, preventing blank displays.
-
1.4 lbs
$1,681.00 -
-
NMX-ENC-N1115-WP Wallplate Encoder
$2,427.00 Add to cartNMX-ENC-N1115-WP Wallplate Encoder
The N1000 Series Encoders and Decoders are an affordable local AV-over-IP switching solution that packetizes video into a minimally compressed IP format that provides excellent video quality at low latencies. This compression is perfect for point-to-point video distribution, small 2×1 switching applications, and larger switching applications (for example, 32×32), all using off-the-shelf layer-3 network switches.
The NMX-ENC-N1115-WP provides the excellent encoding capabilities of the NMX-ENC-N1133 in a 2-gang wallplate format. This encoder can be easily mounted in a wall, lectern, or floor box using a standard 2-gang US back box, and connected to power and Ethernet using only a single category cable.
Specifications
Video - Digital Video Input: HDMI, DVI-D*, Dual-Mode DisplayPort (DP++)*
- Analog Video Input: HD-15 VGA, Component*
- Video Output: Video Output
- Formats: HDMI, DVI-D*, Dual-Mode DisplayPort (DP++)*, HDCP content protection support, RGBHV, YPbPr
- Progressive Input Resolutions
- Supports most common HD up to 1920×1200.
- Interlaced Input Resolutions
- Supports 1080i60.
- Analog Input Resolutions
NOTE: Input resolutions supported @60Hz refresh rates are also supported @59.94Hz. - Supports most common HD up to 1920×1200.
- Output Resolutions: Matched to inputs.
- Analog-To-Digital Conversion: 8-bit 165 MHz per each of three color channels
NOTE: The N1115-WP does not accept Composite or S-Video (YC). - Color Space: 4:2:2
*These signal types are supported through a passive adapter.
Audio - Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo
- Output Signal Types: Ethernet
- Analog Audio Format: 8ch PCM, Stereo 2-channel
- Analog-To-Digital Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz
Latency - Latency: 10 ms at 60 fps
- Bandwidth: 840 Mb/s (varies with resolution)
Note: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency.
Note: Scaling adds one frame of latency (17ms at 60fps).
Communications - Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- HDMI: HDCP, EDID management
Ports - P0:
- 8-wire RJ45 female
- 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
- Provides the network connection, network AV video, and power to the Encoders and Decoders
- HDMI IN: HDMI video input
- VGA IN: DB15 analog input
- USB IN – Host: USB-B host input
- USB IN – Maintenance: USB-Mini maintenance input
Controls and Indicators – Front Panel - RESET Button:
- Recessed pushbutton
- Press to initiate a ‘warm restart’ causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- POWER LED: On solid (green) when operating power is supplied (via PoE or local power supply)
- AUDIO LED: On (green) when audio is transmitting.
- ANALOG VIDEO LEDs: On (green) when analog source is available and transmitting.
- DIGITAL VIDEO LED: On (green) when video source is available and transmitting
- HDCP LED: On (green) when the source is using HDCP
- STREAM LED: On (green) when the unit is streaming video
- STATUS LED: Flashing (green) when the unit is active.
- LINK/ACT LED: Flashing (yellow) when network traffic is being sent or received.
Power Supply - Power over Ethernet
- Can be powered via a PoE switch or other equipment with a PoE source. Conforms to IEEE 802.3af Class 3 (802.3at Type 1)
- Point-to-point applications between the encoder and a decoder requires a PoE injector to power the wallplate encoder.
Note: In order for the unit to receive Power over Ethernet (PoE), it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only.
Environmental - Temperature (Operating): 32° to 104°F (0° to 40°C)
- Temperature (Storage): -22° to 158°F (-30° to 70°C)
- Humidity (Operating): 10% to 90% RH (non-condensing)
- Humidity (Storage): 0% to 90% RH (non-condensing)
- Heat Dissipation: Up to ~26 BTU/hr
General - Dimensions (HWD): 4.06″ x 3.5″ x 2.25″ (10.31 cm x 8.84 cm x 5.72 cm)
- Weight: .75 lb (0.34 kg)
- Airflow: Natural convection via vent openings on front, back, and top
- Installation
- Mounts onto standard 2 gang US back boxes
- Mounts into standard décor style wallplates (not included)
- Regulatory Compliance: FCC, CE, and NTRL
- Recommended Accessories
- Compatible with NMX-ENC-N1222, NMX-ENC-N1233, NMX-ENC-N1512, and NMX-NVR-N6123
- PS-POE-AT-TC High-Power PoE Injector, 802.3AT Compliant FG423-84)
FG Numbers FGN1115-WP-WH (White)
FGN1115-WP-BL (Black)$2,427.00
Reviews
There are no reviews yet.