JPEG 2000 1080p Low Latency AV over IP Encoder with KVM, PoE, SFP, HDMI, AES67 Support, Stand-alone

Related products

• 

  AMX NMX-Dec-N1222A-C

  $1,600.00 Add to cart

  AMX NMX-Dec-N1222A-C

  NMX-DEC-N1222A-C provides the functionality of the NMX-DEC-N1222A in a card form factor for use with the NMX-ACC-N9206 2RU Rack Mount Cage, providing a clean rack mount solution for multiple encoders and decoders. Featuring improved digital pixel reproduction and latency reduction. Packetized video streams not only remain visually lossless throughout distribution, they also arrive instantly.

  • Shipping Weight
    1.15 lbs

  SKU: FGN1222A-CD Categories: AMX, Decoder Card, Encoders/Decoders Brand: AMX

  $1,600.00
• 

  NMX-ENC-N1115-WP Wallplate Encoder

  $2,427.00 Add to cart

  NMX-ENC-N1115-WP Wallplate Encoder

  The N1000 Series Encoders and Decoders are an affordable local AV-over-IP switching solution that packetizes video into a minimally compressed IP format that provides excellent video quality at low latencies. This compression is perfect for point-to-point video distribution, small 2×1 switching applications, and larger switching applications (for example, 32×32), all using off-the-shelf layer-3 network switches.

  The NMX-ENC-N1115-WP provides the excellent encoding capabilities of the NMX-ENC-N1133 in a 2-gang wallplate format. This encoder can be easily mounted in a wall, lectern, or floor box using a standard 2-gang US back box, and connected to power and Ethernet using only a single category cable.

  Specifications

  Video	Digital Video Input: HDMI, DVI-D*, Dual-Mode DisplayPort (DP++)* Analog Video Input: HD-15 VGA, Component* Video Output: Video Output Formats: HDMI, DVI-D*, Dual-Mode DisplayPort (DP++)*, HDCP content protection support, RGBHV, YPbPr Progressive Input Resolutions Supports most common HD up to 1920×1200. Interlaced Input Resolutions Supports 1080i60. Analog Input Resolutions NOTE: Input resolutions supported @60Hz refresh rates are also supported @59.94Hz. Supports most common HD up to 1920×1200. Output Resolutions: Matched to inputs. Analog-To-Digital Conversion: 8-bit 165 MHz per each of three color channels NOTE: The N1115-WP does not accept Composite or S-Video (YC). Color Space: 4:2:2 *These signal types are supported through a passive adapter.
  Audio	Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo Output Signal Types: Ethernet Analog Audio Format: 8ch PCM, Stereo 2-channel Analog-To-Digital Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz
  Latency	Latency: 10 ms at 60 fps Bandwidth: 840 Mb/s (varies with resolution) Note: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency. Note: Scaling adds one frame of latency (17ms at 60fps).
  Communications	Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP HDMI: HDCP, EDID management
  Ports	P0: 8-wire RJ45 female 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port Provides the network connection, network AV video, and power to the Encoders and Decoders HDMI IN: HDMI video input VGA IN: DB15 analog input USB IN – Host: USB-B host input USB IN – Maintenance: USB-Mini maintenance input
  Controls and Indicators – Front Panel	RESET Button: Recessed pushbutton Press to initiate a ‘warm restart’ causing the processor to reset, but not lose power. A reset does NOT affect the current settings POWER LED: On solid (green) when operating power is supplied (via PoE or local power supply) AUDIO LED: On (green) when audio is transmitting. ANALOG VIDEO LEDs: On (green) when analog source is available and transmitting. DIGITAL VIDEO LED: On (green) when video source is available and transmitting HDCP LED: On (green) when the source is using HDCP STREAM LED: On (green) when the unit is streaming video STATUS LED: Flashing (green) when the unit is active. LINK/ACT LED: Flashing (yellow) when network traffic is being sent or received.
  Power Supply	Power over Ethernet Can be powered via a PoE switch or other equipment with a PoE source. Conforms to IEEE 802.3af Class 3 (802.3at Type 1) Point-to-point applications between the encoder and a decoder requires a PoE injector to power the wallplate encoder. Note: In order for the unit to receive Power over Ethernet (PoE), it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only.
  Environmental	Temperature (Operating): 32° to 104°F (0° to 40°C) Temperature (Storage): -22° to 158°F (-30° to 70°C) Humidity (Operating): 10% to 90% RH (non-condensing) Humidity (Storage): 0% to 90% RH (non-condensing) Heat Dissipation: Up to ~26 BTU/hr
  General	Dimensions (HWD): 4.06″ x 3.5″ x 2.25″ (10.31 cm x 8.84 cm x 5.72 cm) Weight: .75 lb (0.34 kg) Airflow: Natural convection via vent openings on front, back, and top Installation Mounts onto standard 2 gang US back boxes Mounts into standard décor style wallplates (not included) Regulatory Compliance: FCC, CE, and NTRL Recommended Accessories Compatible with NMX-ENC-N1222, NMX-ENC-N1233, NMX-ENC-N1512, and NMX-NVR-N6123 PS-POE-AT-TC High-Power PoE Injector, 802.3AT Compliant FG423-84)
  FG Numbers	FGN1115-WP-WH (White) FGN1115-WP-BL (Black)

  SKU: FGN1115-WP-BL Categories: AMX, Encoders/Decoders, Wall Plate Encoder Brand: AMX

  $2,427.00
• 

  Contemporary Research IP-SDI 4i IPTV Decoder with Universal Rackmount

  $1,253.00 Add to cart

  Contemporary Research IP-SDI 4i IPTV Decoder with Universal Rackmount

  Contemporary Research IP-SDI 4i Overview

  Decode digital video and audio for compatibility with television displays with the Contemporary Research IP-SDI 4i IPTV Decoder with Universal Rackmount for increased efficiency for your viewing setup. The IP-SDI 4i decodes MPEG-2 and H.264 video with internal scaling from 480i to 1080p resolution. A 3G-SDI and a HDMI output operate simultaneously.

  The IP-SDI 4i is compatible with unicast or multicast UDP and RTP IP streams with control over the front-panel buttons, handheld IR remote, onboard web GUI, or external control. The free CR Toolbox software allows you to manage the channel list for the device. A universal rackmount and power supply are included for easy installation.

  Features at a Glance

  • Outputs operate simultaneously
  • Channel selection by direct channel entry or channel up/down
  • Decodes analog and digital closed captioning
  • Passes through 608 and 708 closed caption data on SDI output
  • RS-232 can control of up to 9 decoders from a single RS-232 port
  • Firmware updateable over Ethernet from CR Toolbox
  • Meets RoHS and California energy-saving standards

  SKU: 5117‐001 Categories: Decoders, DPA Microphones E/C, Encoders/Decoders Brand: DPA Microphones

  $1,253.00
• 

  AMX NMX-ENC-N2412A, Encoder

  $3,060.00 Add to cart

  AMX NMX-ENC-N2412A, Encoder

  The NMX-ENC-N2412A is the low-latency encoder that distributes video at resolutions up to 4K 4:4:4 over Gigabit Ethernet networks. Utilizing JPEG2000 encoding, the N2412A encoders deliver cinema quality video with just two frames of latency. Furthermore, these products support HDMI 2.0 and HDCP 2.2, offering increased compatibility with 4K sources and displays.

  • Shipping Weight
    1 lbs

  SKU: FGN2412A-SA Categories: AMX, Encoders, Encoders/Decoders Brand: AMX

  $3,060.00