Contemporary Research SSV-DX 1RU Windows 7 Pro PC with Display Express Software

Related products

• 

  AMX NMX-Enc-N1134A

  $2,155.00 Add to cart

  AMX NMX-Enc-N1134A

  SVSi Stand-alone Minimal Compression Video over IP featuring SDI input

  • Shipping Weight
    1.55 lbs

  SKU: FGN1134A-SA Categories: AMX, Encoders, Encoders/Decoders Brand: AMX

  $2,155.00
• 

  NMX-ENC-N3132 Encoder

  $1,465.00 Add to cart

  NMX-ENC-N3132 Encoder

  The N3000 Video over IP Series extends the reach of SVSI’s Networked AV solutions to the WAN for streaming, video to desktop, digital signage, set-top boxes, or mobile devices applications. Fully integrated with existing Networked AV control options, the N3000 Series delivers the highest quality HD video content at the lowest bandwidth for the most demanding applications. Moving video to or from the Cloud just became a lot easier with the N3000.

  The N3000 Series’ H.264 compression engine delivers low-latency 1080p60 video at half the bandwidth of comparable encoders. High profile H.264 encoders output unicast or multicast to one or more N3000 Series decoders. Multiple selectable streaming protocols (RTP, RTSP, and more) allow for software endpoints during video to the desktop applications or third-party hardware endpoints like Roku, Amino, or Google TV. Adjustable bit-rates from 32-Kbps to 10-Mbps give the highest video fidelity at the lowest bandwidths on the market in keeping with SVSI’s commitment to provide unsurpassed Networked AV quality.

  H.264 encoder includes IR, serial, balanced audio, RJ45 and 1GB SFP (fiber or copper) network connections, digital HDMI and analog VGA video input. H.264 encoder card requires NMXACC-N9206 cage.

  Specifications

  Digital Video Input	HDMI, DVI-D, Dual-Mode DisplayPort (DP++), RGB/VGA; DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter
  Analog Video Input	HD-15 VGA, Component, supported through a passive adapter
  Video Outputs	Network video over Ethernet via RJ45 port or fiber via 1G SFP port, HDMI, DVI-D (through passive adapter)
  Video Formats	HDMI, DVI-D (through passive adapter), HDCP content protection support, RGBHV, YPbPr
  Progressive Input Resolutions	Supports most common HD up to 1080p60. See Data Sheet for details.
  Interlaced Input Resolutions	Supports 1080i60. See Data Sheet for details.
  Analog Input Resolutions	Supports most common HD up to 1080p60. See Data Sheet for details.
  Analog-To-Digital Conversion	8-bit 165 MHz per each of three color channels
  Audio Input Signal Types	Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced)
  Audio Output Signal Types	Ethernet, Embedded audio on HDMI or DVI-D (through adapter); HDMI output refers to pass-through video on the HDMI OUT port
  HDMI Audio Formats	Stereo 2-channel
  Analog Audio Formats	Stereo 2-channel
  Audio Analog-to-Digital Conversion	16-bit 32 kHz, 44.1 kHz and 48 kHz
  Latency	175 ms at 60 fps. See Data Sheet for details.
  Communications	Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP; HDMI: HDCP, EDID management. See Data Sheet for details.
  FG Numbers	FGN3132-SA

  SKU: FGN3132-SA Categories: AMX, Encoders, Encoders/Decoders Brand: AMX

  $1,465.00
• 

  AMX Jpeg 2000 Digital Cinema Grade Video Over IP Decoder, HDMI

  $1,681.00 Add to cart

  AMX Jpeg 2000 Digital Cinema Grade Video Over IP Decoder, HDMI

  The AMX SVSI N2000 Series utilizes JPEG2000 compression for HD, cinema-grade video distribution on the LAN for applications when video quality is top priority. The NMX-DEC-N2212A Decoder is used to decode streams back to DVI or HDMI format for display on any monitor. Pair with the NMX-ENC-N2121A to encode and distribute sources of almost any format onto an existing IP network making that stream available to any endpoint in the facility. With the ability to direct any source stream to any display, large, low-cost switching and distribution systems are simple to deploy without proprietary cabling or dedicated switching hardware.

  The NMX-DEC-N2212A includes Local Play, allowing users to upload and save 8 playlists that can contain up to 64 jpeg or PNG files. When a video stream is lost, the stored images will play, preventing blank displays.

  • Shipping Weight
    1.4 lbs

  SKU: FGN2212A-SA Categories: AMX, Decoders, Encoders/Decoders Brand: AMX

  $1,681.00
• 

  NMX-ENC-N1115-WP Wallplate Encoder

  $2,427.00 Add to cart

  NMX-ENC-N1115-WP Wallplate Encoder

  The N1000 Series Encoders and Decoders are an affordable local AV-over-IP switching solution that packetizes video into a minimally compressed IP format that provides excellent video quality at low latencies. This compression is perfect for point-to-point video distribution, small 2×1 switching applications, and larger switching applications (for example, 32×32), all using off-the-shelf layer-3 network switches.

  The NMX-ENC-N1115-WP provides the excellent encoding capabilities of the NMX-ENC-N1133 in a 2-gang wallplate format. This encoder can be easily mounted in a wall, lectern, or floor box using a standard 2-gang US back box, and connected to power and Ethernet using only a single category cable.

  Specifications

  Video	Digital Video Input: HDMI, DVI-D*, Dual-Mode DisplayPort (DP++)* Analog Video Input: HD-15 VGA, Component* Video Output: Video Output Formats: HDMI, DVI-D*, Dual-Mode DisplayPort (DP++)*, HDCP content protection support, RGBHV, YPbPr Progressive Input Resolutions Supports most common HD up to 1920×1200. Interlaced Input Resolutions Supports 1080i60. Analog Input Resolutions NOTE: Input resolutions supported @60Hz refresh rates are also supported @59.94Hz. Supports most common HD up to 1920×1200. Output Resolutions: Matched to inputs. Analog-To-Digital Conversion: 8-bit 165 MHz per each of three color channels NOTE: The N1115-WP does not accept Composite or S-Video (YC). Color Space: 4:2:2 *These signal types are supported through a passive adapter.
  Audio	Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo Output Signal Types: Ethernet Analog Audio Format: 8ch PCM, Stereo 2-channel Analog-To-Digital Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz
  Latency	Latency: 10 ms at 60 fps Bandwidth: 840 Mb/s (varies with resolution) Note: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency. Note: Scaling adds one frame of latency (17ms at 60fps).
  Communications	Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP HDMI: HDCP, EDID management
  Ports	P0: 8-wire RJ45 female 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port Provides the network connection, network AV video, and power to the Encoders and Decoders HDMI IN: HDMI video input VGA IN: DB15 analog input USB IN – Host: USB-B host input USB IN – Maintenance: USB-Mini maintenance input
  Controls and Indicators – Front Panel	RESET Button: Recessed pushbutton Press to initiate a ‘warm restart’ causing the processor to reset, but not lose power. A reset does NOT affect the current settings POWER LED: On solid (green) when operating power is supplied (via PoE or local power supply) AUDIO LED: On (green) when audio is transmitting. ANALOG VIDEO LEDs: On (green) when analog source is available and transmitting. DIGITAL VIDEO LED: On (green) when video source is available and transmitting HDCP LED: On (green) when the source is using HDCP STREAM LED: On (green) when the unit is streaming video STATUS LED: Flashing (green) when the unit is active. LINK/ACT LED: Flashing (yellow) when network traffic is being sent or received.
  Power Supply	Power over Ethernet Can be powered via a PoE switch or other equipment with a PoE source. Conforms to IEEE 802.3af Class 3 (802.3at Type 1) Point-to-point applications between the encoder and a decoder requires a PoE injector to power the wallplate encoder. Note: In order for the unit to receive Power over Ethernet (PoE), it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only.
  Environmental	Temperature (Operating): 32° to 104°F (0° to 40°C) Temperature (Storage): -22° to 158°F (-30° to 70°C) Humidity (Operating): 10% to 90% RH (non-condensing) Humidity (Storage): 0% to 90% RH (non-condensing) Heat Dissipation: Up to ~26 BTU/hr
  General	Dimensions (HWD): 4.06″ x 3.5″ x 2.25″ (10.31 cm x 8.84 cm x 5.72 cm) Weight: .75 lb (0.34 kg) Airflow: Natural convection via vent openings on front, back, and top Installation Mounts onto standard 2 gang US back boxes Mounts into standard décor style wallplates (not included) Regulatory Compliance: FCC, CE, and NTRL Recommended Accessories Compatible with NMX-ENC-N1222, NMX-ENC-N1233, NMX-ENC-N1512, and NMX-NVR-N6123 PS-POE-AT-TC High-Power PoE Injector, 802.3AT Compliant FG423-84)
  FG Numbers	FGN1115-WP-WH (White) FGN1115-WP-BL (Black)

  SKU: FGN1115-WP-BL Categories: AMX, Encoders/Decoders, Wall Plate Encoder Brand: AMX

  $2,427.00