The Dual Side-by-Side Rack Mount from Contemporary Research is a standard rack kit for most Contemporary Research products that use the 1.75 x 8.5″ enclosure.
Contemporary Research Dual Side-by-Side Rack Mount (1 RU)
$38.00
Contemporary Research Dual Side-by-Side Rack Mount (1 RU) Overview
Only logged in customers who have purchased this product may leave a review.
Related products
-
NMX-ENC-N1115-WP Wallplate Encoder
$2,427.00 Add to cartNMX-ENC-N1115-WP Wallplate Encoder
The N1000 Series Encoders and Decoders are an affordable local AV-over-IP switching solution that packetizes video into a minimally compressed IP format that provides excellent video quality at low latencies. This compression is perfect for point-to-point video distribution, small 2×1 switching applications, and larger switching applications (for example, 32×32), all using off-the-shelf layer-3 network switches.
The NMX-ENC-N1115-WP provides the excellent encoding capabilities of the NMX-ENC-N1133 in a 2-gang wallplate format. This encoder can be easily mounted in a wall, lectern, or floor box using a standard 2-gang US back box, and connected to power and Ethernet using only a single category cable.
Specifications
Video - Digital Video Input: HDMI, DVI-D*, Dual-Mode DisplayPort (DP++)*
- Analog Video Input: HD-15 VGA, Component*
- Video Output: Video Output
- Formats: HDMI, DVI-D*, Dual-Mode DisplayPort (DP++)*, HDCP content protection support, RGBHV, YPbPr
- Progressive Input Resolutions
- Supports most common HD up to 1920×1200.
- Interlaced Input Resolutions
- Supports 1080i60.
- Analog Input Resolutions
NOTE: Input resolutions supported @60Hz refresh rates are also supported @59.94Hz. - Supports most common HD up to 1920×1200.
- Output Resolutions: Matched to inputs.
- Analog-To-Digital Conversion: 8-bit 165 MHz per each of three color channels
NOTE: The N1115-WP does not accept Composite or S-Video (YC). - Color Space: 4:2:2
*These signal types are supported through a passive adapter.
Audio - Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo
- Output Signal Types: Ethernet
- Analog Audio Format: 8ch PCM, Stereo 2-channel
- Analog-To-Digital Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz
Latency - Latency: 10 ms at 60 fps
- Bandwidth: 840 Mb/s (varies with resolution)
Note: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency.
Note: Scaling adds one frame of latency (17ms at 60fps).
Communications - Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- HDMI: HDCP, EDID management
Ports - P0:
- 8-wire RJ45 female
- 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
- Provides the network connection, network AV video, and power to the Encoders and Decoders
- HDMI IN: HDMI video input
- VGA IN: DB15 analog input
- USB IN – Host: USB-B host input
- USB IN – Maintenance: USB-Mini maintenance input
Controls and Indicators – Front Panel - RESET Button:
- Recessed pushbutton
- Press to initiate a ‘warm restart’ causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- POWER LED: On solid (green) when operating power is supplied (via PoE or local power supply)
- AUDIO LED: On (green) when audio is transmitting.
- ANALOG VIDEO LEDs: On (green) when analog source is available and transmitting.
- DIGITAL VIDEO LED: On (green) when video source is available and transmitting
- HDCP LED: On (green) when the source is using HDCP
- STREAM LED: On (green) when the unit is streaming video
- STATUS LED: Flashing (green) when the unit is active.
- LINK/ACT LED: Flashing (yellow) when network traffic is being sent or received.
Power Supply - Power over Ethernet
- Can be powered via a PoE switch or other equipment with a PoE source. Conforms to IEEE 802.3af Class 3 (802.3at Type 1)
- Point-to-point applications between the encoder and a decoder requires a PoE injector to power the wallplate encoder.
Note: In order for the unit to receive Power over Ethernet (PoE), it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only.
Environmental - Temperature (Operating): 32° to 104°F (0° to 40°C)
- Temperature (Storage): -22° to 158°F (-30° to 70°C)
- Humidity (Operating): 10% to 90% RH (non-condensing)
- Humidity (Storage): 0% to 90% RH (non-condensing)
- Heat Dissipation: Up to ~26 BTU/hr
General - Dimensions (HWD): 4.06″ x 3.5″ x 2.25″ (10.31 cm x 8.84 cm x 5.72 cm)
- Weight: .75 lb (0.34 kg)
- Airflow: Natural convection via vent openings on front, back, and top
- Installation
- Mounts onto standard 2 gang US back boxes
- Mounts into standard décor style wallplates (not included)
- Regulatory Compliance: FCC, CE, and NTRL
- Recommended Accessories
- Compatible with NMX-ENC-N1222, NMX-ENC-N1233, NMX-ENC-N1512, and NMX-NVR-N6123
- PS-POE-AT-TC High-Power PoE Injector, 802.3AT Compliant FG423-84)
FG Numbers FGN1115-WP-WH (White)
FGN1115-WP-BL (Black)$2,427.00 -
Contemporary Research QIP-YPB2 IPTV Encoder
$1,828.00 Add to cartContemporary Research QIP-YPB2 IPTV Encoder
Contemporary Research QIP-YPB2 IPTVÂ Overview
The Contemporary Research QIP-YPB2 IPTV Encoder is a dual-channel encoder that creates MPEG-2 or H.264 streams from video resolutions up to 1080p. Audio comes through the embedded S/PDIF or analog stereo inputs and is encoded into AC-3, MP12, or AAC formats. Two composite inputs and two component inputs accept up to 1080p video including 60/30 Hz and PAL format and deliver programs at scaled 1080i, 720p 576i, 480p and 480i output resolutions.
Update firmware through the mini-USB on the front panel or the Ethernet port on the rear of the encoder. The onboard webpage allows for setup and monitoring of sources. It’s 1 RU form factor allows for easy installation with the included rackmount and power supply.
Features at a Glance- Can create SAP dual-language audio for each program
- Embedded captioning from Line 21 data on composite video inputs
- Sets up with front-panel buttons and easy-to-use menus
- Onboard web page for set up and monitoring, also accessible from front-panel USB port
- Updates firmware via USB and Ethernet
- Fan cooled, with variable speed
- Meets RoHS safety and California energy standards
$1,828.00 -
AMX NMX-Dec-N1222A-C
$1,600.00 Add to cartAMX NMX-Dec-N1222A-C
NMX-DEC-N1222A-C provides the functionality of the NMX-DEC-N1222A in a card form factor for use with the NMX-ACC-N9206 2RU Rack Mount Cage, providing a clean rack mount solution for multiple encoders and decoders. Featuring improved digital pixel reproduction and latency reduction. Packetized video streams not only remain visually lossless throughout distribution, they also arrive instantly.
-
1.15 lbs
$1,600.00 -
-
AMX NMX-ENC-N2412A, Encoder
$3,060.00 Add to cartAMX NMX-ENC-N2412A, Encoder
The NMX-ENC-N2412A is the low-latency encoder that distributes video at resolutions up to 4K 4:4:4 over Gigabit Ethernet networks. Utilizing JPEG2000 encoding, the N2412A encoders deliver cinema quality video with just two frames of latency. Furthermore, these products support HDMI 2.0 and HDCP 2.2, offering increased compatibility with 4K sources and displays.
-
1 lbs
$3,060.00 -
Reviews
There are no reviews yet.