Shure A95UF - Line Matching Transformer for 75 to 300 Ohm Mics - In-Line XLR Female to 1/4" (Jack and Plug) Barrel

Shure A95UF – Line Matching Transformer for 75 to 300 Ohm Mics – In-Line XLR Female to 1/4″ (Jack and Plug) Barrel

$62.00

SKU: A95UF Categories: , Brand:

Description

The ANI22 Audio Network Interface from Shure is designed to bring up to two line/mic signals onto or from a Dante network. It can be utilized for easy audio routing and convenient browser-based remote control. In addition, it is built with analog block connectors.

Works with Microflex Advance and Microflex Wireless systems
2 input and 2 output analog audio connectors
Converts up to 2 mic / line analog signals onto a Dante Network
Converts up to 2 Dante digital audio signals to line/ mic analog signals
Power over Ethernet (PoE) eliminates need for outboard power supply
Compact form factor is easy to mount without equipment rack

Shure ANI22BLOCK Specs

Inputs (Analog)
2 x 6-pin block connectors
Outputs (Analog)
2 x 3-pin block connectors
Dante Connection
1 x RJ45
Channel Count: 2 inputs, 2 outputs
Polarity
Non-inverting, any input to any output
Power Requirements
Power over Ethernet (PoE), Class 0 (PoE Plus compatible)
Power Consumption
11 W maximum
Application Control
HTML5
Operating Temperature Range
20 to 104°F (-6.7 to 40°C)
Storage Temperature Range
20 to 165°F (-29 to 74°C)
Thermal Dissipation
Maximum: 12.1 W (41.3 BTU/hr)
Typical: 9.8 W (33.7 BTU/hr)
Audio
Frequency Response
20 Hz to 20 kHz ±1 dB
Dante Audio Flows
Sampling Rate: 24-bit/48 kHz
Latency
Does not include Dante latency
Analog to Dante: 0.35 ms
Dante to Analog: 0.71 ms
Analog Gain Range
51 dB (adjustable in 3 dB steps)
Dynamic Range
113 dB, 20 Hz to 20 kHz, A-weighted, typical
Equivalent Input Noise
20 Hz to 20 kHz, A-weighted, input terminated with 150 Ohms
Analog Gain Setting = +0 dB, -93 dBV
Analog Gain Setting = +27 dB, -119 dBV
Analog Gain Settings = +51 dB, -130 dBV
Total Harmonic Distortion (THD)
<0.05% @ 1 kHz, 0 dBV input, 0 dB analog gain
Common Mode Rejection Ratio
>70 dB, 50 Ohms balanced source @ 1 kHz
Input Impedance
5 kOhms
Output Impedance
150 Ohms
Input Clipping Level
Analog Gain Setting = +0 dB, +20 dBV
Analog Gain Setting = +27 dB, -7 dBV
Analog Gain Setting = +51 dB, -31 dBV
Analog Output Levels
Selectable Line 0 dB
Aux -20 dB
Mic -46 dB
Digital Signal Processing (DSP)
Per Channel: Equalizer (4-band Parametric, Dante channels only), Mute, Limiter, Gain (140 dB range)
System: Channel Summing
Networking
Cat 5e or higher (shielded cable recommended)
Dimensions
1.6 x 5.5 x 5.0″ (4 x 14 x 12.8 cm)
Weight
1.5 lb (672 g)
Packaging Info
Package Weight
2.7 lb
Box Dimensions (LxWxH)
10.1 x 6.6 x 3.3″

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products