Vaddio RoboSHOT 12 HDBaseT Indoor PTZ Camera (Silver/Black)

$3,092.40

Vaddio RoboSHOT 12 OneLINK Bridge System (Silver/Black)

Wishlist Compare
SKU: 999-9960-000 Category: Brand:

Description

The RoboSHOT 12 OneLINK Bridge System from Vaddio combines a silver and black RoboSHOT 12 PTZ camera and OneLINK HDMI extension system. It is suitable for use in distance learning and corporate environments. The system captures 1920 x 1080 video at 60p from a single 1/2.8″-type Exmor sensor and transmits it up to 328′ over Cat 5e cable. The combination enables powering the camera, sending control signals, and transmitting video over a single Ethernet cable.

Vaddio RoboSHOT 12 HDBaseT Indoor PTZ Camera (Silver/Black) Specs

Camera
Sync System
Internal
Sensor
1/2.8″-type Exmor CMOS
Pixels
Total: 2.14 MP
Effective: 2.38 MP
Zoom
Optical: 12x
Horizontal Field-of-View
Wide: 73°
Tele: 6.6°
Focusing
Auto Focus
Manual Focus Mode
One-Push Trigger Mode
Infinity Mode
Near Limit Mode
Minimum Focus Distance
Wide: 0.4″ / 10 mm
Tele: 2.62′ / 0.80 m
White Balance
Auto
ATW
Indoor
Outdoor
One-Push
Manual
Aperture/Detail
16 Steps
Gain
Auto / Manual (28 steps)
Backlight Compensation
On/Off
Noise Reduction
On/Off, 6 Steps
S/N Ratio
Over 50 dB
Output
Protocols
HDMI
HDBT
IP (H.264)

Aspect Ratio
HDMI: 16:9 (all resolutions)
IP (H.264) Streaming: 16:9, 3:2, 4:3

HDMI Resolutions/Frame Rates
1080p: 59.94

PTZ
Pan
Angle: -160 to 160°
Speed: 0.35°/sec to 120°/sec
Tilt
Angle: -30 to 90°
Speed: 0.35°/sec to 120°/sec
Control
Vaddio IR remote commander
Web interface
Telnet
RS-232
Physical and Environmental
Power
12 VDC, 3 A power supply
PoE+
Temperature & Humidity
Operating/Storage
32 to 104°F / 0 to 40°C
20 to 80% RH (non-condensing)
Dimensions
6.93 x 7.05 x 6.77″ / 176 x 179 x 172 mm
Weight
4.9 lb / 2.2 kg
Packaging Info
Package Weight
10.75 lb
Box Dimensions (LxWxH)
13.6 x 12.1 x 11.8″

Vaddio OneLINK Bridge A/V Interface Receiver For HDBaseT Cameras (North America) Specs

General
Compatibility
Vaddio RoboSHOT 12E / RoboSHOT 30E HDBT / RoboSHOT 20 UHD / RoboSHOT 40 UHD / RoboSHOT IW / DocCAM 20 HDBT
Video Format
Up to 1080p60
Inputs / Outputs
USB I/O
1 x USB-B 3.0 / 3.1/3.2 Gen 1 Female Output
Video I/O
1x HDMI Output
1x BNC (3G-SDI) Output
Audio I/O
2x Block 3-Pin Line/Mic Input
2x Block 3-Pin Line/Speaker Output
Other I/O
1 x RJ45 Ethernet
1 x RJ45 RS-232 Serial
1 x RJ45 OneLINK Digital Camera Interface
Cable Distance Supported
Maximum 328′ / 100 m
Power Input
DC Barrel
Power
Power Source
AC Input
DC Input Power
48 VDC at 1.36 A
Certifications
CE, FCC, TAA, UL
Operating Temperature
32 to 72°F / 0 to 40°C
Operating Humidity
15 to 80% ()
Storage Temperature
-4 to 140°F / -20 to 60°C
Storage Humidity
15 to 80% (Non-Condensing)
Physical
Dimensions
8.4 x 6 x 1.7″ / 21.3 x 15.2 x 4.4 cm
Weight
3.3 lb / 1.5 kg
Packaging Info
Package Weight
3.43 lb
Box Dimensions (LxWxH)
12.3 x 9.3 x 3.2″

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.