Here is a professional rack mount kit to mount a wireless receiver into a standard 19″ rack, including front mount cables and antenna splitter cables.
Showing 1–9 of 17 results
Here is a professional rack mount kit to mount a wireless receiver into a standard 19″ rack, including front mount cables and antenna splitter cables.
The N3000 Series H.264 compression engine delivers low-latency video at half the bandwidth of comparable encoders. High profile H.264 encoders output unicast or multicast to one or more N3000 Series decoders. Multiple selectable streaming protocols (RTP, RTSP, and more) allow for software endpoints during video to the desktop applications or third-party hardware endpoints like Roku, Amino, or Google TV. Adjustable bit-rates give the highest video fidelity at the lowest bandwidths on the market in keeping with SVSI’s commitment to provide unsurpassed Networked AV quality.
The N3000 Video over IP Series extends the reach of SVSI’s Networked AV solutions to the WAN for streaming, video to desktop, digital signage, set-top boxes, or mobile devices applications. Fully integrated with existing Networked AV control options, the N3000 Series delivers the highest quality HD video content at the lowest bandwidth for the most demanding applications. Moving video to or from the Cloud just became a lot easier with the N3000.
ÂÂ
The AMX PR01-RX HDBaseT Receiver and Scaler provides a cost-effective end-point for the AMX Precis 8×8 HDMI Matrix Switcher. The affordable PR01-RX receiver provides built-in scaling, network passthrough, and network configuration, offering a cost-effective solution for distributing video outputs from the Precis 8×8 over longer distances without degrading video quality. The addition of built-in scaling on the PR01-RX provides clean transitions when switching between sources and an output that matches the display resolution regardless of the source.
| FG Numbers | FG1020-050 |
The NMX-DEC-N2322 decoder provide a flexible, feature-rich, and simple-to-deploy digital media distribution and switching solution which can be used in 4K applications with resolutions up to 4096 x 2160, with support for HDCP 2.2. This motion-based wavelet codec solution delivers video with nearly imperceptible latency at an incredibly low 200 Mb/s bandwidth allowing 4K distribution over standard gigabit Ethernet networks.
The AMX DXLink 4K60 HDMI Receiver Module is a 4K60 4:4:4 capable distance transport solution that features built-in SmartScale® Technology to deliver HDMI 2.0 with HDCP 2.2 that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio, video, control, Ethernet, and USB 2.0 over one shielded Cat6, Cat6A or Cat7 standard twisted pair cable. DXLink 4K60 HDMI Receiver Modules are perfect for receiving HDMI and control signals over long distances from a remote DXLink 4K60 Transmitter Module or other compatible AMX Transmitters such as the DGX DXLink 4K60 Twisted Pair Output Board. The receiver’s built-in control ports can be used to control a destination device and the ICSLan port provides an IP network access port when used in conjunction with the Enova DGX 100 Series.
| Dimensions (HWD) | 1″ x 8 2/3″ x 6 1/3″ (2.54 cm x 22.0 cm x 16.0 cm) |
| Twisted Pair Cable Type & Length | Shielded Cat6, Shielded Cat6A, Cat7. Distances up to 328 ft (100 m) supported on Shielded Cat6A and Cat7 |
| Back Connectors | Local Power: 2.1mm DC Power Jack; DXLink Port: RJ-45; USB Host Port: USB Type B; USB Device Port: USB Type A; ICSLAN/Ethernet Port: RJ-45; IR-RX Port: 3.5mm Mini Mono Jack; IR-TX Port: 2-pin Phoenix; Serial Port: 3-pin Phoenix; HDMI Out: HDMI Type A Female; Analog Stereo Output: 3.5mm Mini-Stereo Jack |
| USB2.0 | USB2.0 supported point-to-point to DXLink 4K60 compatible switcher or DXLink 4K60 HDMI Transmitter |
| HDMI | Compatible Formats: HDMI2.0, HDCP2.2, DVI |
| Resolution Support | Up to 4096 x 2160p @ 60 Hz, 4:4:4 |
| HDMI Audio | Audio Resolution: 16 bit to 24 bit; Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz |
| HDCP | HDCP2.2 |
| FG Numbers | FG1010-512-01 FG1010-512-02 (TAA) |
The AMX DXLink 4K60 HDMI Receiver Module is a 4K60 4:4:4 capable distance transport solution that features built-in SmartScale® Technology to deliver HDMI 2.0 with HDCP 2.2 that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio, video, control, Ethernet, and USB 2.0 over one shielded Cat6, Cat6A or Cat7 standard twisted pair cable. DXLink 4K60 HDMI Receiver Modules are perfect for receiving HDMI and control signals over long distances from a remote DXLink 4K60 Transmitter Module or other compatible AMX Transmitters such as the DGX DXLink 4K60 Twisted Pair Output Board. The receiver’s built-in control ports can be used to control a destination device and the ICSLan port provides an IP network access port when used in conjunction with the Enova DGX 100 Series.
| Dimensions (HWD) | 1″ x 8 2/3″ x 6 1/3″ (2.54 cm x 22.0 cm x 16.0 cm) |
| Twisted Pair Cable Type & Length | Shielded Cat6, Shielded Cat6A, Cat7. Distances up to 328 ft (100 m) supported on Shielded Cat6A and Cat7 |
| Back Connectors | Local Power: 2.1mm DC Power Jack; DXLink Port: RJ-45; USB Host Port: USB Type B; USB Device Port: USB Type A; ICSLAN/Ethernet Port: RJ-45; IR-RX Port: 3.5mm Mini Mono Jack; IR-TX Port: 2-pin Phoenix; Serial Port: 3-pin Phoenix; HDMI Out: HDMI Type A Female; Analog Stereo Output: 3.5mm Mini-Stereo Jack |
| USB2.0 | USB2.0 supported point-to-point to DXLink 4K60 compatible switcher or DXLink 4K60 HDMI Transmitter |
| HDMI | Compatible Formats: HDMI2.0, HDCP2.2, DVI |
| Resolution Support | Up to 4096 x 2160p @ 60 Hz, 4:4:4 |
| HDMI Audio | Audio Resolution: 16 bit to 24 bit; Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz |
| HDCP | HDCP2.2 |
| FG Numbers | FG1010-512-01 FG1010-512-02 (TAA) |
The DXLink HDMI Fiber Receiver features built-in SmartScale® Technology to deliver HDMI with HDCP that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio, video, control and Ethernet over multimode fiber from up to 300 meters. Mount the low-profile DXLink Fiber Receiver behind a display or above a ceiling mounted projector and control it using the built in RS-232 or IR ports. Plus monitor the connected display’s settings, and send IR control signals to the Enova DGX Digital Media Switcher with integrated NetLinx® control back to the source device.
| Dimensions (HWD) | 1″ x 8 3/4″ x 5 1/5″ (2.54 x 22.12 cm x 13.08 cm) |
| DxLink Fiber | Fiber Connector: LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A); Fiber Cable Length: 300m (984 ft) |
| USB (HID) | (1) USB Mini A/B Connector (“DEVICE”) |
| Front Connectors | Advanced Configuration Interface: (1) USB Mini-B Connector (“PROGRAM”) |
| Back Connectors | Local Power: 2.1 mm DC Power Jack; DXLink Fiber Input: LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A); ICS LAN/Ethernet Port: (1) RJ-45 Connector |
| HDMI | Compatible Formats: HDMI, HDCP, DVI |
| HDMI Resolution Support | Progressive Resolution Support: All progressive resolutions between 480p and 1920 x 1200 @ 60 Hz via automatic SmartScale query of the display’s preferred DID Detailed Timing Definition; Interlaced Resolution Support: 480i, 576i, 1080i |
| HDMI Audio Support | Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM, Dolby Digital and DTS support up to 48kHz, 5.1 channels; Audio Resolution: 16 bit to 24 bit |
| HDCP | HDCP Support: Yes |
| Stereo Audio | Output Signal Types: Stereo Analog; Output Connectors: 3.5mm Mini-Stereo Jack |
| Power Supply | External, Included: Each HDMI RX ships with a desktop power supply with power cord, 2.5 A @ 12 V, Max 13.5 V |
| Compatible AMX Products | Enova DGX 800/1600/3200/6400 Digital Media Switchers with DGX-O-DXF-MMD, Enova DGX DXLink Mutimode Fiber Output Board, Duplex (FG1058-632) installed |
| FG Numbers | FG1010-562 |
The DXLink HDMI Fiber Receiver features built-in SmartScale® Technology to deliver HDMI with HDCP that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio and video over multimode fiber from up to 300 meters. Mount the low-profile DXLink Fiber Receiver behind a display or above a ceiling mounted projector.
| Dimensions (HWD) | 1″ x 8 3/4″ x 5 1/5″ (2.54 x 22.12 cm x 13.08 cm) |
| DxLink Fiber | Fiber Connector: LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A); Fiber Cable Length: 300m (984 ft) |
| USB (HID) | (1) USB Mini A/B Connector (“DEVICE”) |
| Front Connectors | Advanced Configuration Interface: (1) USB Mini-B Connector (“PROGRAM”) |
| Back Connectors | Local Power: 2.1 mm DC Power Jack; DXLink Fiber Input: LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A); ICS LAN/Ethernet Port: (1) RJ-45 Connector |
| HDMI | Compatible Formats: HDMI, HDCP, DVI |
| HDMI Resolution Support | Progressive Resolution Support: All progressive resolutions between 480p and 1920 x 1200 @ 60 Hz via automatic SmartScale query of the display’s preferred DID Detailed Timing Definition; Interlaced Resolution Support: 480i, 576i, 1080i |
| HDMI Audio Support | Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM, Dolby Digital and DTS support up to 48kHz, 5.1 channels; Audio Resolution: 16 bit to 24 bit |
| HDCP | HDCP Support: Yes |
| Stereo Audio | Output Connections: 3.5mm Mini-Stereo Jack; Output Signal Types: Stereo Analog |
| Power Supply | External, Included: Each HDMI RX ships with a desktop power supply with power cord, 2.5 A @ 12 V, Max 13.5 V |
| Compatible AMX Products | Enova DGX 800/1600/3200/6400 Digital Media Switchers with Multimode Fiber Output Board installed including DGX-O-DXF-MMS or DGX-O-DXF-MMD; Direct point-to-point connection with a Multimode Fiber Transmitter including DXF-TX-MMS or DXF-TX-MMD |
| FG Numbers | FG1010-563 |