AMX
Showing 17–24 of 45 results
-
AMX PR01-RX HDBaseT Receiver and Scaler
$1,075.00 Add to cartAMX PR01-RX HDBaseT Receiver and Scaler
The AMX PR01-RX HDBaseT Receiver and Scaler provides a cost-effective end-point for the AMX Precis 8×8 HDMI Matrix Switcher. The affordable PR01-RX receiver provides built-in scaling, network passthrough, and network configuration, offering a cost-effective solution for distributing video outputs from the Precis 8×8 over longer distances without degrading video quality. The addition of built-in scaling on the PR01-RX provides clean transitions when switching between sources and an output that matches the display resolution regardless of the source.
Specifications
FG Numbers FG1020-050 $1,075.00 -
AMX SCL-1 4K60 Scaler
$750.00 Add to cartAMX SCL-1 4K60 Scaler
The AMX SCL-1 4K60 Scaler is a small-format scaler that adjusts the output to match the optimal resolution of the display. The scaler includes a single input and a single output, with a size small enough to be mounted behind a display. It was designed to be used in combination with products such as the local HDMI outputs on the AMX Precis 8×8 that do not have built-in scaling. This offers a more flexible, lower cost solution for installations where scaling is needed only on certain outputs.
The scaler is compatible with 4K60 4:4:4 resolutions and HDCP 2.2, offering support for the latest source devices and displays. Because the scaler includes automatic scaling, the device can be configured to automatically scale to the optimal resolution of the display based on its EDID. It can be set to always scale to a particular resolution.
Features
- 4K60 4:4:4 Support – Experience pixel-for-pixel video reproduction of 4K60 source video with full 4:4:4 color space.
- HDCP 2.2 Support – Support the latest source devices.
- Automatic Scaling Option – Can be configured to automatically scale to the optimal resolution of the display based on its EDID. Can also be set to always scale to a particular resolution.
$750.00 -
AMX SVSI N2300 Series stand-alone 4K Decoder
$1,126.00 Add to cartAMX SVSI N2300 Series stand-alone 4K Decoder
The NMX-DEC-N2322 decoder provide a flexible, feature-rich, and simple-to-deploy digital media distribution and switching solution which can be used in 4K applications with resolutions up to 4096 x 2160, with support for HDCP 2.2. This motion-based wavelet codec solution delivers video with nearly imperceptible latency at an incredibly low 200 Mb/s bandwidth allowing 4K distribution over standard gigabit Ethernet networks.
-
1.75 lbs
$1,126.00 -
-
CBL-DP-FL2 DisplayPort
$160.00 Add to cart -
CBL-HDMI-FL2
$150.00 Add to cart -
DX-RX-4K60 DXLink 4K60 HDMI Receiver Module
$1,439.00 Add to cartDX-RX-4K60 DXLink 4K60 HDMI Receiver Module
The AMX DXLink 4K60 HDMI Receiver Module is a 4K60 4:4:4 capable distance transport solution that features built-in SmartScale® Technology to deliver HDMI 2.0 with HDCP 2.2 that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio, video, control, Ethernet, and USB 2.0 over one shielded Cat6, Cat6A or Cat7 standard twisted pair cable. DXLink 4K60 HDMI Receiver Modules are perfect for receiving HDMI and control signals over long distances from a remote DXLink 4K60 Transmitter Module or other compatible AMX Transmitters such as the DGX DXLink 4K60 Twisted Pair Output Board. The receiver’s built-in control ports can be used to control a destination device and the ICSLan port provides an IP network access port when used in conjunction with the Enova DGX 100 Series.
Specifications
Dimensions (HWD) 1″ x 8 2/3″ x 6 1/3″ (2.54 cm x 22.0 cm x 16.0 cm) Twisted Pair Cable Type & Length Shielded Cat6, Shielded Cat6A, Cat7.
Distances up to 328 ft (100 m) supported on
Shielded Cat6A and Cat7Back Connectors Local Power: 2.1mm DC Power Jack;
DXLink Port: RJ-45;
USB Host Port: USB Type B;
USB Device Port: USB Type A;
ICSLAN/Ethernet Port: RJ-45;
IR-RX Port: 3.5mm Mini Mono Jack;
IR-TX Port: 2-pin Phoenix;
Serial Port: 3-pin Phoenix;
HDMI Out: HDMI Type A Female;
Analog Stereo Output: 3.5mm Mini-Stereo JackUSB2.0 USB2.0 supported point-to-point to DXLink 4K60 compatible switcher or DXLink 4K60 HDMI Transmitter HDMI Compatible Formats: HDMI2.0, HDCP2.2, DVI Resolution Support Up to 4096 x 2160p @ 60 Hz, 4:4:4 HDMI Audio Audio Resolution: 16 bit to 24 bit;
Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHzHDCP HDCP2.2 FG Numbers FG1010-512-01
FG1010-512-02 (TAA)$1,439.00 -
DX-RX-4K60 DXLink 4K60 HDMI Receiver Module
$1,439.00 Add to cartDX-RX-4K60 DXLink 4K60 HDMI Receiver Module
The AMX DXLink 4K60 HDMI Receiver Module is a 4K60 4:4:4 capable distance transport solution that features built-in SmartScale® Technology to deliver HDMI 2.0 with HDCP 2.2 that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio, video, control, Ethernet, and USB 2.0 over one shielded Cat6, Cat6A or Cat7 standard twisted pair cable. DXLink 4K60 HDMI Receiver Modules are perfect for receiving HDMI and control signals over long distances from a remote DXLink 4K60 Transmitter Module or other compatible AMX Transmitters such as the DGX DXLink 4K60 Twisted Pair Output Board. The receiver’s built-in control ports can be used to control a destination device and the ICSLan port provides an IP network access port when used in conjunction with the Enova DGX 100 Series.
Specifications
Dimensions (HWD) 1″ x 8 2/3″ x 6 1/3″ (2.54 cm x 22.0 cm x 16.0 cm) Twisted Pair Cable Type & Length Shielded Cat6, Shielded Cat6A, Cat7.
Distances up to 328 ft (100 m) supported on
Shielded Cat6A and Cat7Back Connectors Local Power: 2.1mm DC Power Jack;
DXLink Port: RJ-45;
USB Host Port: USB Type B;
USB Device Port: USB Type A;
ICSLAN/Ethernet Port: RJ-45;
IR-RX Port: 3.5mm Mini Mono Jack;
IR-TX Port: 2-pin Phoenix;
Serial Port: 3-pin Phoenix;
HDMI Out: HDMI Type A Female;
Analog Stereo Output: 3.5mm Mini-Stereo JackUSB2.0 USB2.0 supported point-to-point to DXLink 4K60 compatible switcher or DXLink 4K60 HDMI Transmitter HDMI Compatible Formats: HDMI2.0, HDCP2.2, DVI Resolution Support Up to 4096 x 2160p @ 60 Hz, 4:4:4 HDMI Audio Audio Resolution: 16 bit to 24 bit;
Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHzHDCP HDCP2.2 FG Numbers FG1010-512-01
FG1010-512-02 (TAA)$1,439.00 -
DXF-RX-MMD DXLinkâ„¢ HDMI Multimode Fiber Receiver, Duplex
$907.46 Add to cartDXF-RX-MMD DXLinkâ„¢ HDMI Multimode Fiber Receiver, Duplex
The DXLink HDMI Fiber Receiver features built-in SmartScale® Technology to deliver HDMI with HDCP that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio, video, control and Ethernet over multimode fiber from up to 300 meters. Mount the low-profile DXLink Fiber Receiver behind a display or above a ceiling mounted projector and control it using the built in RS-232 or IR ports. Plus monitor the connected display’s settings, and send IR control signals to the Enova DGX Digital Media Switcher with integrated NetLinx® control back to the source device.
Specifications
Dimensions (HWD) 1″ x 8 3/4″ x 5 1/5″ (2.54 x 22.12 cm x 13.08 cm) DxLink Fiber Fiber Connector: LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A); Fiber Cable Length: 300m (984 ft) USB (HID) (1) USB Mini A/B Connector (“DEVICE”) Front Connectors Advanced Configuration Interface: (1) USB Mini-B Connector (“PROGRAM”) Back Connectors Local Power: 2.1 mm DC Power Jack; DXLink Fiber Input: LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A); ICS LAN/Ethernet Port: (1) RJ-45 Connector HDMI Compatible Formats: HDMI, HDCP, DVI HDMI Resolution Support Progressive Resolution Support: All progressive resolutions between 480p and 1920 x 1200 @ 60 Hz via automatic SmartScale query of the display’s preferred DID Detailed Timing Definition; Interlaced Resolution Support: 480i, 576i, 1080i HDMI Audio Support Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM, Dolby Digital and DTS support up to 48kHz, 5.1 channels; Audio Resolution: 16 bit to 24 bit HDCP HDCP Support: Yes Stereo Audio Output Signal Types: Stereo Analog; Output Connectors: 3.5mm Mini-Stereo Jack Power Supply External, Included: Each HDMI RX ships with a desktop power supply with power cord, 2.5 A @ 12 V, Max 13.5 V Compatible AMX Products Enova DGX 800/1600/3200/6400 Digital Media Switchers with DGX-O-DXF-MMD, Enova DGX DXLink Mutimode Fiber Output Board, Duplex (FG1058-632) installed FG Numbers FG1010-562 $907.46