The Dual Side-by-Side Rack Mount from Contemporary Research is a standard rack kit for most Contemporary Research products that use the 1.75 x 8.5″ enclosure.
Contemporary Research Dual Side-by-Side Rack Mount (1 RU)
$38.00
Contemporary Research Dual Side-by-Side Rack Mount (1 RU) Overview
Only logged in customers who have purchased this product may leave a review.
Related products
-
AMX N2300 Series 4K UHD Video over IP Stand Alone Encoder
$1,396.00 Add to cartAMX N2300 Series 4K UHD Video over IP Stand Alone Encoder
The NMX-ENC-N2312 Encoder and NMX-DEC-N2322 Decoder provide a flexible, feature-rich, and simple-to-deploy Digital Media Distribution and Switching solution that can be used in 4K applications with resolutions up to 4096×2160, with support for HDCP 2.2. This motion-based wavelet codec solution delivers video with nearly imperceptible latency at an incredibly low 200 Mb/s bandwidth allowing 4K distribution over standard gigabit Ethernet networks.
Any source can be sent to one or more displays by routing through layer-2 / layer-3 switches utilizing standard Cat5e cable. The NMX-ENC-N2312 includes standard features like input scaling, bi-directional serial, IR, embedded 7.1 audio, and KVMover- IP extension.
-
1 lbs
$1,396.00 -
-
NMX-ENC-N1115-WP Wallplate Encoder
$2,427.00 Add to cartNMX-ENC-N1115-WP Wallplate Encoder
The N1000 Series Encoders and Decoders are an affordable local AV-over-IP switching solution that packetizes video into a minimally compressed IP format that provides excellent video quality at low latencies. This compression is perfect for point-to-point video distribution, small 2×1 switching applications, and larger switching applications (for example, 32×32), all using off-the-shelf layer-3 network switches.
The NMX-ENC-N1115-WP provides the excellent encoding capabilities of the NMX-ENC-N1133 in a 2-gang wallplate format. This encoder can be easily mounted in a wall, lectern, or floor box using a standard 2-gang US back box, and connected to power and Ethernet using only a single category cable.
Specifications
Video - Digital Video Input: HDMI, DVI-D*, Dual-Mode DisplayPort (DP++)*
- Analog Video Input: HD-15 VGA, Component*
- Video Output: Video Output
- Formats: HDMI, DVI-D*, Dual-Mode DisplayPort (DP++)*, HDCP content protection support, RGBHV, YPbPr
- Progressive Input Resolutions
- Supports most common HD up to 1920×1200.
- Interlaced Input Resolutions
- Supports 1080i60.
- Analog Input Resolutions
NOTE: Input resolutions supported @60Hz refresh rates are also supported @59.94Hz. - Supports most common HD up to 1920×1200.
- Output Resolutions: Matched to inputs.
- Analog-To-Digital Conversion: 8-bit 165 MHz per each of three color channels
NOTE: The N1115-WP does not accept Composite or S-Video (YC). - Color Space: 4:2:2
*These signal types are supported through a passive adapter.
Audio - Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo
- Output Signal Types: Ethernet
- Analog Audio Format: 8ch PCM, Stereo 2-channel
- Analog-To-Digital Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz
Latency - Latency: 10 ms at 60 fps
- Bandwidth: 840 Mb/s (varies with resolution)
Note: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency.
Note: Scaling adds one frame of latency (17ms at 60fps).
Communications - Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- HDMI: HDCP, EDID management
Ports - P0:
- 8-wire RJ45 female
- 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
- Provides the network connection, network AV video, and power to the Encoders and Decoders
- HDMI IN: HDMI video input
- VGA IN: DB15 analog input
- USB IN – Host: USB-B host input
- USB IN – Maintenance: USB-Mini maintenance input
Controls and Indicators – Front Panel - RESET Button:
- Recessed pushbutton
- Press to initiate a ‘warm restart’ causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- POWER LED: On solid (green) when operating power is supplied (via PoE or local power supply)
- AUDIO LED: On (green) when audio is transmitting.
- ANALOG VIDEO LEDs: On (green) when analog source is available and transmitting.
- DIGITAL VIDEO LED: On (green) when video source is available and transmitting
- HDCP LED: On (green) when the source is using HDCP
- STREAM LED: On (green) when the unit is streaming video
- STATUS LED: Flashing (green) when the unit is active.
- LINK/ACT LED: Flashing (yellow) when network traffic is being sent or received.
Power Supply - Power over Ethernet
- Can be powered via a PoE switch or other equipment with a PoE source. Conforms to IEEE 802.3af Class 3 (802.3at Type 1)
- Point-to-point applications between the encoder and a decoder requires a PoE injector to power the wallplate encoder.
Note: In order for the unit to receive Power over Ethernet (PoE), it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only.
Environmental - Temperature (Operating): 32° to 104°F (0° to 40°C)
- Temperature (Storage): -22° to 158°F (-30° to 70°C)
- Humidity (Operating): 10% to 90% RH (non-condensing)
- Humidity (Storage): 0% to 90% RH (non-condensing)
- Heat Dissipation: Up to ~26 BTU/hr
General - Dimensions (HWD): 4.06″ x 3.5″ x 2.25″ (10.31 cm x 8.84 cm x 5.72 cm)
- Weight: .75 lb (0.34 kg)
- Airflow: Natural convection via vent openings on front, back, and top
- Installation
- Mounts onto standard 2 gang US back boxes
- Mounts into standard décor style wallplates (not included)
- Regulatory Compliance: FCC, CE, and NTRL
- Recommended Accessories
- Compatible with NMX-ENC-N1222, NMX-ENC-N1233, NMX-ENC-N1512, and NMX-NVR-N6123
- PS-POE-AT-TC High-Power PoE Injector, 802.3AT Compliant FG423-84)
FG Numbers FGN1115-WP-WH (White)
FGN1115-WP-BL (Black)$2,427.00 -
AMX NMX-ENC-N1115-WP-WH, Wallplate Encoder
$2,425.00 Add to cartAMX NMX-ENC-N1115-WP-WH, Wallplate Encoder
The N1000 series encoders and decoders are an affordable local AV-over-IP switching solution that packetizes video into a minimally compressed IP format that provides excellent video quality at low latencies. This compression is perfect for point-to-point video distribution, small switching applications, and larger switching applications, all using off-the-shelf layer-3 network switches.
-
1 lbs
$2,425.00 -
-
Contemporary Research QDA4-45 RF Distribution Amplifier & Combiner
$409.00 Add to cartContemporary Research QDA4-45 RF Distribution Amplifier & Combiner
Contemporary Research QDA4-45Â Overview
The Contemporary Research QDA4-45 is an amplified RF combiner that can switch between one or four inputs, with adjustable amplification up to 50 dBmV. You can add up to 32 dBmV gain for one input, and 25 dB for four inputs. Designed for QMOD HDTV applications, the unit can receive an RF feed from QMOD modulators or QCA9-33 active combiners. Inputs can be switched between one or four inputs, with selectable gain. This compact unit mounts two-across in a single rack space using CR RK1 and RK-2 rack kits (available separately), and can be mixed with QMOD HDTV modulators using the same rack kits.
Compatibility- QMOD HDTV modulators
- QCA9-33 active combiner
Product Highlights- Switches between one input or four input combiner
- Adds up to 32 dBmV gain for one input, 25 dB for four inputs
- Adjusts RF gain from front-panel controls and LCD display
- Provides a maximum output level of up to 50 dBmV
- Wideband, low-noise amplifier
- Low power, draws less than 8.5W
- Compact metal enclosure, mounts 2 across in 1 RU using RK1 and RK2 rack kits (available separately)
- Made in USA
Applications- Use the QDA4-45 as a 4-channel, 45 dB amplifier for larger RF applications
- Combine up to four QMOD modulators
- Combine four QCA9-33 active combiners for 36 channels
- Use as launch amplifier for the RF system
- Use as booster amplifier to merge QMOD channels with existing 50 dB analog modulator systems
$409.00
Reviews
There are no reviews yet.