DXFP-RX-4K60 DXLink 4K60 HDMI Fiber Receiver Module
$2,228.00
The AMX DXLink 4K60 HDMI Fiber Receiver is HDMI 2.0 and HDCP 2.2 compliant. It supports 4K60 4:4:4 video and High Dynamic Range (HDR) for optimum video quality and pixel-for-pixel image reproduction without chroma subsampling. DXLink 4K60 Fiber allows end users to realize the full potential of their source and display devices by fully supporting 36-bit Deep Color for the richest, most realistic video.ÂÂ
This module receives audio, video, control, USB 2.0, and Ethernet over duplex fiber from a DXLink 4K60 Fiber transmitter up to 300 meters away. It includes a Multi-Mode Duplex (MMD) SFP, which can be replaced with a Single-Mode Duplex (SMD) SFP if needed.
Specifications
| Dimensions (HWD) | 220mm x 25mm x 220mm / 8.66’’ x 0.98’’ x 8.66†|
| DxLink Fiber | Fiber Connector: LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A) |
| USB | USB HID and USB 2.0 are supported point-to-point to DXLink 4K60 HDMI Fiber Transmitters and DGX DXLink 4K60 Fiber Output Boards. |
| Back Connectors | Local Power: 2.1mm DC Power Jack; DXLink Fiber Input: LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A); ICS LAN/Ethernet Port: RJ-45 Connector; HDMI Output: HDMI Type-A Receptacle; Serial: 3.5mm Phoenix Receptacle; IR RX: 3.5mm mini Jack; IR TX: 3.5mm mini Jack; USB Host: USB Type B Connector; USB Device: USB Type A Connector; Analog Audio Output: 3.5mm mini Stereo Jack |
| HDMI | Compatible Formats: HDMI, HDCP |
| 4K Format Support | Scaler Mode: 3840×2160@24/25/30/50/60 (4:4:4); 4096×2160@24/25/30/60 (4:4:4) Bypass Mode: 3840×2160@24/25/30/50; 4096×2160@24/25/30; 3840×2160@60 4:4:4; 4096×2160@60 4:2:0 |
| HDMI Audio Support | Bypass Mode: Dolby TrueHD, Dolby Digital, DTS-HD MA, DTS, 2 CH L-PCM, 6 CH L-PCM, 8 CH L-PCM Dolby Digital and DTS support up to 48kHz, 5.1 channels Scaler Mode: PCM 2.0 |
| HDCP | HDCP Support: Yes, 1.4, 2.2 |
| Power Supply | Each RX ships with a desktop power supply with power cord |
| Compatible AMX Products | Enova DGX 800/1600/3200/6400 Digital Media Switchers with DGX DXLink 4K60 Fiber Output Board (DGX-O-DXFP-4K60) installed, DXLink 4K60 Fiber Transmitters (DXFP-TX-4K60) |
| FG Numbers | DXFP-RX-4K60 (FG1010-565-01) DXFP-RX-4K60-TAA (FG1010-565-02) |
Only logged in customers who have purchased this product may leave a review.
Related products
-
AMX PR01-RX HDBaseT Receiver and Scaler
$1,075.00 Add to cartAMX PR01-RX HDBaseT Receiver and Scaler
The AMX PR01-RX HDBaseT Receiver and Scaler provides a cost-effective end-point for the AMX Precis 8×8 HDMI Matrix Switcher. The affordable PR01-RX receiver provides built-in scaling, network passthrough, and network configuration, offering a cost-effective solution for distributing video outputs from the Precis 8×8 over longer distances without degrading video quality. The addition of built-in scaling on the PR01-RX provides clean transitions when switching between sources and an output that matches the display resolution regardless of the source.
Specifications
FG Numbers FG1020-050 $1,075.00 -
Shure GLXD6+ Dual-Band Wireless Guitar Pedal Receiver (Z3: 2.4, 5.8 GHz)
$259.00 Add to cartShure GLXD6+ Dual-Band Wireless Guitar Pedal Receiver (Z3: 2.4, 5.8 GHz)
The GLXD6+ Dual Band Guitar Pedal receiver is engineered in a rugged metal design that can be completely integrated into your pedalboard.
$259.00 -
DXF-RX-MMD DXLinkâ„¢ HDMI Multimode Fiber Receiver, Duplex
$907.46 Add to cartDXF-RX-MMD DXLinkâ„¢ HDMI Multimode Fiber Receiver, Duplex
The DXLink HDMI Fiber Receiver features built-in SmartScale® Technology to deliver HDMI with HDCP that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio, video, control and Ethernet over multimode fiber from up to 300 meters. Mount the low-profile DXLink Fiber Receiver behind a display or above a ceiling mounted projector and control it using the built in RS-232 or IR ports. Plus monitor the connected display’s settings, and send IR control signals to the Enova DGX Digital Media Switcher with integrated NetLinx® control back to the source device.
Specifications
Dimensions (HWD) 1″ x 8 3/4″ x 5 1/5″ (2.54 x 22.12 cm x 13.08 cm) DxLink Fiber Fiber Connector: LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A); Fiber Cable Length: 300m (984 ft) USB (HID) (1) USB Mini A/B Connector (“DEVICE”) Front Connectors Advanced Configuration Interface: (1) USB Mini-B Connector (“PROGRAM”) Back Connectors Local Power: 2.1 mm DC Power Jack; DXLink Fiber Input: LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A); ICS LAN/Ethernet Port: (1) RJ-45 Connector HDMI Compatible Formats: HDMI, HDCP, DVI HDMI Resolution Support Progressive Resolution Support: All progressive resolutions between 480p and 1920 x 1200 @ 60 Hz via automatic SmartScale query of the display’s preferred DID Detailed Timing Definition; Interlaced Resolution Support: 480i, 576i, 1080i HDMI Audio Support Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM, Dolby Digital and DTS support up to 48kHz, 5.1 channels; Audio Resolution: 16 bit to 24 bit HDCP HDCP Support: Yes Stereo Audio Output Signal Types: Stereo Analog; Output Connectors: 3.5mm Mini-Stereo Jack Power Supply External, Included: Each HDMI RX ships with a desktop power supply with power cord, 2.5 A @ 12 V, Max 13.5 V Compatible AMX Products Enova DGX 800/1600/3200/6400 Digital Media Switchers with DGX-O-DXF-MMD, Enova DGX DXLink Mutimode Fiber Output Board, Duplex (FG1058-632) installed FG Numbers FG1010-562 $907.46 -
DX-RX-4K60 DXLink 4K60 HDMI Receiver Module
$1,439.00 Add to cartDX-RX-4K60 DXLink 4K60 HDMI Receiver Module
The AMX DXLink 4K60 HDMI Receiver Module is a 4K60 4:4:4 capable distance transport solution that features built-in SmartScale® Technology to deliver HDMI 2.0 with HDCP 2.2 that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio, video, control, Ethernet, and USB 2.0 over one shielded Cat6, Cat6A or Cat7 standard twisted pair cable. DXLink 4K60 HDMI Receiver Modules are perfect for receiving HDMI and control signals over long distances from a remote DXLink 4K60 Transmitter Module or other compatible AMX Transmitters such as the DGX DXLink 4K60 Twisted Pair Output Board. The receiver’s built-in control ports can be used to control a destination device and the ICSLan port provides an IP network access port when used in conjunction with the Enova DGX 100 Series.
Specifications
Dimensions (HWD) 1″ x 8 2/3″ x 6 1/3″ (2.54 cm x 22.0 cm x 16.0 cm) Twisted Pair Cable Type & Length Shielded Cat6, Shielded Cat6A, Cat7.
Distances up to 328 ft (100 m) supported on
Shielded Cat6A and Cat7Back Connectors Local Power: 2.1mm DC Power Jack;
DXLink Port: RJ-45;
USB Host Port: USB Type B;
USB Device Port: USB Type A;
ICSLAN/Ethernet Port: RJ-45;
IR-RX Port: 3.5mm Mini Mono Jack;
IR-TX Port: 2-pin Phoenix;
Serial Port: 3-pin Phoenix;
HDMI Out: HDMI Type A Female;
Analog Stereo Output: 3.5mm Mini-Stereo JackUSB2.0 USB2.0 supported point-to-point to DXLink 4K60 compatible switcher or DXLink 4K60 HDMI Transmitter HDMI Compatible Formats: HDMI2.0, HDCP2.2, DVI Resolution Support Up to 4096 x 2160p @ 60 Hz, 4:4:4 HDMI Audio Audio Resolution: 16 bit to 24 bit;
Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHzHDCP HDCP2.2 FG Numbers FG1010-512-01
FG1010-512-02 (TAA)$1,439.00
Reviews
There are no reviews yet.