JPEG 2000 1080p Low Latency AV over IP Encoder with KVM, PoE, SFP, HDMI, AES67 Support, Card
$3,830.00
SVSI Stand-alone JPEG2000 Encoder with ultra-low latency for 1080p/60hz, KVM control, one SFP fiber/RJ45 copper network port cage, and one RJ45 (with PoE), IR, serial, KVM-over-IP keyboard and mouse operation, balanced audio, VGA, and HDMI connectors, AES67 compatible (SFP module not included, power supply not included)
Only logged in customers who have purchased this product may leave a review.
Related products
-
AMX NMX-ENC-N1115-WP-WH, Wallplate Encoder
$2,425.00 Add to cartAMX NMX-ENC-N1115-WP-WH, Wallplate Encoder
The N1000 series encoders and decoders are an affordable local AV-over-IP switching solution that packetizes video into a minimally compressed IP format that provides excellent video quality at low latencies. This compression is perfect for point-to-point video distribution, small switching applications, and larger switching applications, all using off-the-shelf layer-3 network switches.
-
1 lbs
$2,425.00 -
-
NMX-ENC-N3132 Encoder
$1,465.00 Add to cartNMX-ENC-N3132 Encoder
The N3000 Video over IP Series extends the reach of SVSI’s Networked AV solutions to the WAN for streaming, video to desktop, digital signage, set-top boxes, or mobile devices applications. Fully integrated with existing Networked AV control options, the N3000 Series delivers the highest quality HD video content at the lowest bandwidth for the most demanding applications. Moving video to or from the Cloud just became a lot easier with the N3000.
The N3000 Series’ H.264 compression engine delivers low-latency 1080p60 video at half the bandwidth of comparable encoders. High profile H.264 encoders output unicast or multicast to one or more N3000 Series decoders. Multiple selectable streaming protocols (RTP, RTSP, and more) allow for software endpoints during video to the desktop applications or third-party hardware endpoints like Roku, Amino, or Google TV. Adjustable bit-rates from 32-Kbps to 10-Mbps give the highest video fidelity at the lowest bandwidths on the market in keeping with SVSI’s commitment to provide unsurpassed Networked AV quality.
H.264 encoder includes IR, serial, balanced audio, RJ45 and 1GB SFP (fiber or copper) network connections, digital HDMI and analog VGA video input. H.264 encoder card requires NMXACC-N9206 cage.
Specifications
Digital Video Input HDMI, DVI-D, Dual-Mode DisplayPort (DP++), RGB/VGA; DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter Analog Video Input HD-15 VGA, Component, supported through a passive adapter Video Outputs Network video over Ethernet via RJ45 port or fiber via 1G SFP port, HDMI, DVI-D (through passive adapter) Video Formats HDMI, DVI-D (through passive adapter), HDCP content protection support, RGBHV, YPbPr Progressive Input Resolutions Supports most common HD up to 1080p60. See Data Sheet for details. Interlaced Input Resolutions Supports 1080i60. See Data Sheet for details. Analog Input Resolutions Supports most common HD up to 1080p60. See Data Sheet for details. Analog-To-Digital Conversion 8-bit 165 MHz per each of three color channels Audio Input Signal Types Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced) Audio Output Signal Types Ethernet, Embedded audio on HDMI or DVI-D (through adapter); HDMI output refers to pass-through video on the HDMI OUT port HDMI Audio Formats Stereo 2-channel Analog Audio Formats Stereo 2-channel Audio Analog-to-Digital Conversion 16-bit 32 kHz, 44.1 kHz and 48 kHz Latency 175 ms at 60 fps. See Data Sheet for details. Communications Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP; HDMI: HDCP, EDID management. See Data Sheet for details. FG Numbers FGN3132-SA $1,465.00 -
NMX-ENC-N1115-WP Wallplate Encoder
$2,427.00 Add to cartNMX-ENC-N1115-WP Wallplate Encoder
The N1000 Series Encoders and Decoders are an affordable local AV-over-IP switching solution that packetizes video into a minimally compressed IP format that provides excellent video quality at low latencies. This compression is perfect for point-to-point video distribution, small 2×1 switching applications, and larger switching applications (for example, 32×32), all using off-the-shelf layer-3 network switches.
The NMX-ENC-N1115-WP provides the excellent encoding capabilities of the NMX-ENC-N1133 in a 2-gang wallplate format. This encoder can be easily mounted in a wall, lectern, or floor box using a standard 2-gang US back box, and connected to power and Ethernet using only a single category cable.
Specifications
Video - Digital Video Input: HDMI, DVI-D*, Dual-Mode DisplayPort (DP++)*
- Analog Video Input: HD-15 VGA, Component*
- Video Output: Video Output
- Formats: HDMI, DVI-D*, Dual-Mode DisplayPort (DP++)*, HDCP content protection support, RGBHV, YPbPr
- Progressive Input Resolutions
- Supports most common HD up to 1920×1200.
- Interlaced Input Resolutions
- Supports 1080i60.
- Analog Input Resolutions
NOTE: Input resolutions supported @60Hz refresh rates are also supported @59.94Hz. - Supports most common HD up to 1920×1200.
- Output Resolutions: Matched to inputs.
- Analog-To-Digital Conversion: 8-bit 165 MHz per each of three color channels
NOTE: The N1115-WP does not accept Composite or S-Video (YC). - Color Space: 4:2:2
*These signal types are supported through a passive adapter.
Audio - Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo
- Output Signal Types: Ethernet
- Analog Audio Format: 8ch PCM, Stereo 2-channel
- Analog-To-Digital Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz
Latency - Latency: 10 ms at 60 fps
- Bandwidth: 840 Mb/s (varies with resolution)
Note: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency.
Note: Scaling adds one frame of latency (17ms at 60fps).
Communications - Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- HDMI: HDCP, EDID management
Ports - P0:
- 8-wire RJ45 female
- 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
- Provides the network connection, network AV video, and power to the Encoders and Decoders
- HDMI IN: HDMI video input
- VGA IN: DB15 analog input
- USB IN – Host: USB-B host input
- USB IN – Maintenance: USB-Mini maintenance input
Controls and Indicators – Front Panel - RESET Button:
- Recessed pushbutton
- Press to initiate a ‘warm restart’ causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- POWER LED: On solid (green) when operating power is supplied (via PoE or local power supply)
- AUDIO LED: On (green) when audio is transmitting.
- ANALOG VIDEO LEDs: On (green) when analog source is available and transmitting.
- DIGITAL VIDEO LED: On (green) when video source is available and transmitting
- HDCP LED: On (green) when the source is using HDCP
- STREAM LED: On (green) when the unit is streaming video
- STATUS LED: Flashing (green) when the unit is active.
- LINK/ACT LED: Flashing (yellow) when network traffic is being sent or received.
Power Supply - Power over Ethernet
- Can be powered via a PoE switch or other equipment with a PoE source. Conforms to IEEE 802.3af Class 3 (802.3at Type 1)
- Point-to-point applications between the encoder and a decoder requires a PoE injector to power the wallplate encoder.
Note: In order for the unit to receive Power over Ethernet (PoE), it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only.
Environmental - Temperature (Operating): 32° to 104°F (0° to 40°C)
- Temperature (Storage): -22° to 158°F (-30° to 70°C)
- Humidity (Operating): 10% to 90% RH (non-condensing)
- Humidity (Storage): 0% to 90% RH (non-condensing)
- Heat Dissipation: Up to ~26 BTU/hr
General - Dimensions (HWD): 4.06″ x 3.5″ x 2.25″ (10.31 cm x 8.84 cm x 5.72 cm)
- Weight: .75 lb (0.34 kg)
- Airflow: Natural convection via vent openings on front, back, and top
- Installation
- Mounts onto standard 2 gang US back boxes
- Mounts into standard décor style wallplates (not included)
- Regulatory Compliance: FCC, CE, and NTRL
- Recommended Accessories
- Compatible with NMX-ENC-N1222, NMX-ENC-N1233, NMX-ENC-N1512, and NMX-NVR-N6123
- PS-POE-AT-TC High-Power PoE Injector, 802.3AT Compliant FG423-84)
FG Numbers FGN1115-WP-WH (White)
FGN1115-WP-BL (Black)$2,427.00 -
NMX-DEC-N1222A Decoder
$1,650.00 Add to cartNMX-DEC-N1222A Decoder
The new NMX-DEC-N1222A model features improved digital pixel reproduction and reduces latency to an industry leading 10-ms for gigabit links. Packetized video streams not only remain visually lossless throughout distribution, they also arrive instantly.
The N1000 Series Encoders and Decoders are an affordable local AV over IP switching solution that packetizes video into a minimally compressed IP format to create anywhere from a small 2×1 seamless presentation switcher up to a mid-size video matrices, particularly in scenarios that require imperceptible latency.
The N1000 Series Encoders and Decoders are an affordable local AV over IP switching solution that utilizes off-the-shelf network switches.
Specifications
FG Numbers FGN1222A-SA $1,650.00
Reviews
There are no reviews yet.