The QCP8 Passive Combiner from Contemporary Research is a passive VHF/UHF RF combiner designed for CATV head-end applications. With eight RF inputs and a single RF output, the QCP8 combines multiple RF sources, such as 45 dB out QMOD HDTV modulators and IPTV encoders, with a low 11 dB net loss. It comes with a universal rackmount kit, and vents on each side of the aluminum enclosure allow you to mount the unit side by side with actively cooled QMOD encoder/modulators and the half-rack width provides ample room for a shared rack unit with another 1 RU device.
JPEG 2000 1080p Low Latency AV over IP Encoder with KVM, PoE, SFP, HDMI, AES67 Support, Stand-alone
$3,880.00
SVSI Stand-alone JPEG2000 Encoder with ultra-low latency for 1080p/60hz, KVM control, one SFP fiber/RJ45 copper network port cage, and one RJ45 (with PoE), IR, serial, KVM-over-IP keyboard and mouse operation, balanced audio, VGA, and HDMI connectors, AES67 compatible (SFP module not included, power supply not included)
Only logged in customers who have purchased this product may leave a review.
Related products
-
AMX NMX-Enc-N1134A
$2,155.00 Add to cartAMX NMX-Enc-N1134A
SVSi Stand-alone Minimal Compression Video over IP featuring SDI input
-
1.55 lbs
$2,155.00 -
-
Contemporary Research QCP8 Passive Combiner
$254.00 Add to cart -
NMX-ENC-N1133A-C Encoder Card
$1,966.00 Add to cartNMX-ENC-N1133A-C Encoder Card
The new NMX-ENC-N1133A-C provides the functionality of the NMX-ENC-N1133A in a card form factor for use with the NMX-ACC-N9206 2RU Rack Mount Cage, providing a clean rack mount solution for multiple encoders and decoders. It Features improved digital pixel reproduction and cut the already imperceptible latency in half. Packetized video streams not only remain visually lossless throughout distribution, they also arrive instantly. It has separate HDMI and VGA/RGB inputs, supports PoE, AES67, and has a separate SFP port. The SFP fiber path allows visually lossless video to be routed on a fiber-only network and extend signals beyond the reach of category cable. Added USB connectivity will enable users to extend USB over IP for select touch-enabled displays and KVM applications.
The N1000 Series Encoders and Decoders are an affordable local AV over IP switching solution that packetizes video into a minimally compressed IP format to create anywhere from a small 2×1 seamless presentation switcher up to a mid-size matrix switcher using off-the-shelf network switches.
Specifications
Video - Digital Video Input: HDMI, DVI-D (through adapter), RGB/VGA
- Analog Video Input:
- HD-15 VGA, Component
- Component is supported through a passive adapter
- Video Output:
- Network video over Ethernet via RJ45 port or fiber via 1G SFP port, HDMI, DVI-D
- DVI-D is supported through a passive adapter
- Formats
- HDMI, DVI-D (through adapter), Dual-Mode DisplayPort (DP++), HDCP content protection support, RGBHV, YPbPr
- DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter
- Progressive Input Resolutions
- Supports most common HD up to 1920×1200.
- **720×480 @ 59Hz, 640×480 @ 60Hz, **720×480 @ 60Hz, **720×576 @ 50Hz, 800×600 @ 56Hz, 800×600 @ 60Hz, **1280×720 @ 50Hz, **1280×720 @ 59Hz, **1280×720 @ 60Hz, 1360×768 @ 60Hz, 1366×768 @ 60Hz, 1024×768 @ 60Hz, 1280×800 @ 60Hz, 1152×864 @ 60Hz, 1600×900 @ 60Hz, 1440×900 @ 60Hz, 1280×960 @ 60Hz, 1280×1024 @ 60Hz, ***1600×1200 @ 60Hz, 1680×1050 @ 60Hz, 1920×1080 @ 23Hz, 1920×1080 @ 24Hz, 1920×1080 @ 25Hz, 1920×1080 @ 29Hz, 1920×1080 @ 30Hz, **1920×1080 @ 50Hz, **1920×1080 @ 59Hz, **1920×1080 @ 60Hz, **1920x1080i @ 50Hz, **1920x1080i @ 59Hz, **1920x1080i @ 60Hz, ***1920×1200 @ 60Hz
- Interlaced Input Resolutions
- Supports 1080i60.
- **720×480 @ 59Hz, 640×480 @ 60Hz, **720×480 @ 60Hz, **720×576 @ 50Hz, 800×600 @ 56Hz, 800×600 @ 60Hz, **1280×720 @ 50Hz, **1280×720 @ 59Hz, **1280×720 @ 60Hz, 1360×768 @ 60Hz, 1366×768 @ 60Hz, 1024×768 @ 60Hz, 1280×800 @ 60Hz, 1152×864 @ 60Hz, 1600×900 @ 60Hz, 1440×900 @ 60Hz, 1280×960 @ 60Hz, 1280×1024 @ 60Hz, ***1600×1200 @ 60Hz, 1680×1050 @ 60Hz, 1920×1080 @ 23Hz, 1920×1080 @ 24Hz, 1920×1080 @ 25Hz, 1920×1080 @ 29Hz, 1920×1080 @ 30Hz, **1920×1080 @ 50Hz, **1920×1080 @ 59Hz, **1920×1080 @ 60Hz, **1920x1080i @ 50Hz, **1920x1080i @ 59Hz, **1920x1080i @ 60Hz, ***1920×1200 @ 60Hz
- Analog Input Resolutions
NOTE: Input resolutions supported @60Hz refresh rates are also supported @59.94Hz. - Supports most common HD up to 1920×1200.
- **720×480 @ 59Hz, 640×480 @ 60Hz, **720×480 @ 60Hz, **720×576 @ 50Hz, 800×600 @ 56Hz, 800×600 @ 60Hz, **1280×720 @ 50Hz, **1280×720 @ 59Hz, **1280×720 @ 60Hz, 1360×768 @ 60Hz, 1366×768 @ 60Hz, 1024×768 @ 60Hz, 1280×800 @ 60Hz, 1152×864 @ 60Hz, 1600×900 @ 60Hz, 1440×900 @ 60Hz, 1280×960 @ 60Hz, 1280×1024 @ 60Hz, ***1600×1200 @ 60Hz, 1680×1050 @ 60Hz, 1920×1080 @ 23Hz, 1920×1080 @ 24Hz, 1920×1080 @ 25Hz, 1920×1080 @ 29Hz, 1920×1080 @ 30Hz, **1920×1080 @ 50Hz, **1920×1080 @ 59Hz, **1920×1080 @ 60Hz, **1920x1080i @ 50Hz, **1920x1080i @ 59Hz, **1920x1080i @ 60Hz, ***1920×1200 @ 60Hz
- Analog-To-Digital Conversion: 8-bit 165 MHz per each of three color channels
NOTE: The N1133 Encoder does not accept Composite or S-Video (YC).
**supported in component mode
***reduced blanking only
Audio - Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced)
- Output Signal Types: Ethernet at 48-kHz (standard SVSI audio stream or AES67, user selectable)
- HDMI Audio Formats: 8ch PCM
- Analog Audio Format: Stereo 2-channel
- Analog-To-Digital Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz
Latency - Video Latency: 10 ms at 60 fps
- Audio Latency: standard SVSI audio stream = 17 ms(synced to video); AES67 = <1 ms adjustable to 17 ms
Note: Video and audio latency values are the combined encode plus decode latency. Total latency from source to screen will also include any network latency.
Note: Scaling adds one frame of latency (17ms at 60fps).
Communications - Ethernet
- P0: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- P1: 1 Gbps port which accepts compatible fiber transceivers or direct attach cables (fiber or copper cabling)
- HDMI: HDCP, EDID management
Ports - +12V 2A: One 12 Volt DC power input
- P0:
- 8-wire RJ45 female
- 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
- Provides the network connection, network AV video, and power to the Encoders and Decoders
- P1:
- SFP port (SFP fiber transceiver or direct attach cable not included) for MPC compressed networked AV video
- Provides network connection to the Encoders and Decoders
- IR:
- 2-pin terminal Phoenix connector
- Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included)
- RS232: 3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate
- AUDIO: 5-pin terminal Phoenix connector which provides user-selectable balanced/unbalanced input. Dedicated audio input
- HDMI IN: HDMI video input
- VGA IN: DB15 analog input
- USB connectors (front panel): USB-B control input and two USB-A control inputs
Controls and Indicators – Front Panel - RESET Button:
- Recessed pushbutton
- Press to initiate a ‘warm restart’ causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- ID Button:
- Recessed pushbutton
- Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
- POWER LED:
- On solid (green) when operating power is supplied (via PoE or local power supply)
- This activity is also shown by the PWR LED on the rear panel
- STATUS LED:
- On flashing (green) when there is software activity
- This activity is also shown by the STAT LED on the rear panel
Controls and Indicators – Rear Panel - PWR LED: Same as POWER LED described above
- HDMI LED: On (green) when there is a connection to a valid video source
- STAT LED: Same as STATUS LED described above
- STRM LED: On (green) when the unit is streaming video
Environmental - Temperature: 32° to 104°F (0° to 40°C)
- Humidity: 10% to 90% RH (non-condensing)
- Heat Dissipation: Up to ~44 BTU/hr
General - Regulatory Compliance: FCC, CE, and NTRL
- Recommended Accessories: NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
FG Numbers FGN1133A-CD $1,966.00 -
Contemporary Research IP-SDI 4i IPTV Decoder with Universal Rackmount
$1,253.00 Add to cartContemporary Research IP-SDI 4i IPTV Decoder with Universal Rackmount
Contemporary Research IP-SDI 4i Overview
Decode digital video and audio for compatibility with television displays with the Contemporary Research IP-SDI 4i IPTV Decoder with Universal Rackmount for increased efficiency for your viewing setup. The IP-SDI 4i decodes MPEG-2 and H.264 video with internal scaling from 480i to 1080p resolution. A 3G-SDI and a HDMI output operate simultaneously.
The IP-SDI 4i is compatible with unicast or multicast UDP and RTP IP streams with control over the front-panel buttons, handheld IR remote, onboard web GUI, or external control. The free CR Toolbox software allows you to manage the channel list for the device. A universal rackmount and power supply are included for easy installation.
Features at a Glance- Outputs operate simultaneously
- Channel selection by direct channel entry or channel up/down
- Decodes analog and digital closed captioning
- Passes through 608 and 708 closed caption data on SDI output
- RS-232 can control of up to 9 decoders from a single RS-232 port
- Firmware updateable over Ethernet from CR Toolbox
- Meets RoHS and California energy-saving standards
$1,253.00
Reviews
There are no reviews yet.