Description
The Shure MXWAPT4-Z10 Four-Channel Access Point Transceiver and ANIUSB-Matrix Kit from B&H works with Microflex Wireless and devices equipped with Dante digital networked audio (sold separately). It sends and receives up to 4 channels and uses automated frequency coordination to assign clean frequencies to wireless microphone transmitters.
The ANIUSB-Matrix connects to 4 Dante input channels and one analog output for a room audio/video conferencing system or to a PC-based A/V application via a USB connection. Featuring AES 256-bit encryption for secure transmission and bi-directional wireless capabilities, the kit can be powered via a single Ethernet cable. In addition, a paint cover, mounting plate, and a USB memory stick are also included.
Shure MXWAPT4 4-Channel Access Point Transceiver Specs
| Network Interface |
RJ45: Gigabit Ethernet, Dante digital audio
|
| Plenum |
Rating: UL 2043
|
| Power Requirement |
Power over Ethernet (PoE) Class 0, 6.5 W
|
| Antenna Type |
Internal, spacial diversity, circular polarization
|
| Housing |
Molded plastic, cast zinc
|
| Dimensions |
1.35 x 6.70 x 6.70″ (24 x 170 x 170 mm)
|
| Weight |
Unit: 1.88 lb (856 g)
Paintable Cover: 0.2 lb (85 g)
Mounting Bracket: 0.15 lb (68 g)
|
Packaging Info
| Package Weight |
2.9 lb
|
| Box Dimensions (LxWxH) |
8.268 x 7.559 x 2.992″
|
Shure ANIUSB-MATRIX USB Audio Network Interface Specs
| Inputs (Analog) |
1 x 3-pin block connector (active balanced)
|
| Outputs (Analog) |
1 x 3-pin block connector (impedance balanced)
|
| USB Connection |
1 x USB 2.0, Type-B
|
| Dante Connection |
1 x RJ45
Channel Count: 4 inputs, 2 outputs
|
| Polarity |
Non-inverting, any input to any output
|
| Power Requirements |
Power over Ethernet (PoE), Class 0 (PoE Plus compatible)
|
| Power Consumption |
6.5 W maximum
|
| Application Control |
HTML5 browser based
|
| Operating Temperature Range |
20 to 104°F (-6.7 to 40°C)
|
| Storage Temperature Range |
20 to 165°F (-29 to 74°C)
|
| Thermal Dissipation |
Maximum: 6.8 W (23.0 BTU/hr)
Typical: 6.0 W (20.8 BTU/hr)
|
Audio
| Frequency Response |
20 Hz to 20 kHz +1, -1.5 dB
|
| Dante Audio Flows |
Sampling Rate: 24-bit/48 kHz
|
| USB Audio |
16-, 24-bit/44.1, 48 kHz
|
| Latency |
Does not include Dante latency
Analog to Analog: 0.98 ms
Analog to Dante 0.39 ms
Dante to Analog: 0.72 ms
Dante to Dante: 0.14 ms
|
| Dynamic Range |
20 Hz to 20 kHz, A-weighted, typical
Analog to Dante: 113 dB
Dante to Analog: 117 dB
|
| Equivalent Input Noise |
20 Hz to 20 kHz, A-weighted, input terminated with 150 Ohms
Line: -86 dBV
Aux: -98 dBV
|
| Total Harmonic Distortion (THD) |
<0.05% @ 1 kHz, 0 dBV input, 0 dB analog gain
|
| Common Mode Rejection Ratio |
>70 dB, 150 Ohms balanced source @ 1 kHz
|
| Impedance |
10.6 kOhms
|
| Input Clipping Level |
Line: +27 dBV
Aux: +15 dBV
|
| Output Clip Level |
Line: +20 dBV
Aux: 0 dBV
Mic: -26 dBV
|
| Digital Signal Processing (DSP) |
Per Channel: Equalizer (4-band Parametric, Analog and USB output channels only), Mute, Limiter, Gain (140 dB range)
System: Matrix mixer
|
| Networking |
Cat 5e or higher (shielded cable recommended)
|
| Dimensions |
1.6 x 5.5 x 5.0″ (4 x 14 x 12.8 cm)
|
| Weight |
1.5 lb (672 g)
|
Packaging Info
| Package Weight |
2.45 lb
|
| Box Dimensions (LxWxH) |
10.1 x 6.6 x 3.3″
|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.